Page 19
Installation and Assembly
optoCONTROL CLS1000
4.5
Electrical Connections Controller
4.5.1
General Pin Assignment
Fig. 7 4-pin M12 cable socket for voltage supply
Fig. 8 5-pin M12 cable socket for voltage supply for con-
troller with trigger function
The frequently used and standardized M12 sockets allow use of standard commercial cables to match the specific, spe-
cial requirements of the specific operating environment.
4.5.2
Supply Voltage
To connect the supply voltage:
- 12 ... 30 VDC;
I
max
< 50 mA
- 4-pin
1
or 5-pin connector (with trigger function)
MICRO-EPSILON recommends use of the signal/power supply cable PC1000-5, which is included in the delivery.
Perform all electrical connections only in the switched-off state.
> Risk of injury from high voltage.
Install the shielded signal/power supply cable PC1000-5 on the controller, or PC1000-2 for the trigger function.
Activate the supply voltage.
The green LED is illuminated when the supply voltage is active.
