Page 46
Decommissioning, Disposal
optoCONTROL CLS1000
9.
Decommissioning, Disposal
In order to avoid the release of environmentally harmful substances and to ensure the reuse of valuable raw materials,
we draw your attention to the following regulations and obligations:
- Remove all cables from the sensor and/or controller.
- Dispose of the sensor and/or the controller, its components and accessories, as well as the packaging materials in
compliance with the applicable country-specific waste treatment and disposal regulations of the region of use.
- You are obliged to comply with all relevant national laws and regulations
For Germany / the EU, the following (disposal) instructions apply in particular:
- Waste equipment marked with a crossed garbage can must not be disposed of with normal
industrial waste (e.g. residual waste can or the yellow recycling bin) and must be disposed of
separately. This avoids hazards to the environment due to incorrect disposal and ensures prop-
er recycling of the old appliances.
- A list of national laws and contacts in the EU member states can be found at
Here you can inform yourself about the respective national collection and return points.
- Old devices can also be returned for disposal to MICRO-EPSILON at the address given in the imprint at
- We would like to point out that you are responsible for deleting the measurement-specific and personal data on the
old devices to be disposed of.
- Under the registration number WEEE-Reg.-Nr. DE28605721, we are registered at the foundation Elektro-Altgeräte Reg-
ister, Nordostpark 72, 90411 Nuremberg, as a manufacturer of electrical and/or electronic equipment.
