MHG Heating ThermSelect, Assembly, Commissioning And Maintenance Instructions

Page: 8 / 100

1. Safety
ThermSelect®
8/100
1.5 Special dangers
In the following section the remaining risks are specified which result
based on the risk analysis.
The safety information listed here and the warning instructions in the
subsequent chapters of this manual must be followed to reduce
health risks and to avoid dangerous situations.
Electrical current
DANGER!
Risk to life through electrical current!
Contact with live components can cause serious inju-
ries.
Therefore:
-
Work on electrical systems may only be performed
by professional electricians.
-
Turn off electric power before beginning the work
activities and secure against being turned on again.
-
In case of damaged insulation, immediately cut off
the power supply and initiate the repair.
Hot surfaces
PRECAUTION!
Risk of burning from hot surfaces!
Contact with hot components can cause burns.
Therefore:
-
Always wear protective gloves when working near
hot components.
-
Make sure that all components have cooled down
to the ambient temperature before commencing any
work.
-
Do not touch the compressor and hot gas line dur-
ing operation.