MHG Heating ThermSelect, Assembly, Commissioning And Maintenance Instructions

Page: 17 / 100

ThermSelect®
4. General
17/100
4 General
4.1 Product description
ThermSelect
®
is is available in the versions,
•
ThermSelect
®
•
ThermSelect
®
Pro
•
ThermSelect
®
Sun
•
ThermSelect
®
Sun Pro
and with extensive accessory sets. The standard sizes are available
for a capacity range from
10.4-40.9
kW.
ThermSelect® mode of operation
Ground or air heat are alternatively used after specifying a bivalence
point.
ThermSelect® Pro mode of operation
Ground and/or air heat are used in parallel or alternatively.
ThermSelect® Sun mode of operation
Ground or air heat are alternatively used on the source side and so-
lar heat on the sink side.
ThermSelect® Sun Pro mode of operation
Ground and air heat plus solar heat are used on the source side, so-
lar heat is fed into the heat sink if there is an excess.
Inner part:
-
Combined,
space-saving
air-brine/water heat pump hybrid system
in a compact design with 2 integrated, weather-controlled heat
pump controllers
-
Size width x depth x height
•
Version 1:: 690x600x900
•
Version 2: 1,030x730x900
-
Quiet running through sound-decoupled cooling unit, low noise de-
velopment through sound-decoupled
compressor and sound-
insulated housing
-
High-performance evaporator for brine operation
-
Outdoor temperature sensor, as well as flow and return heat pump
sensors, heat source inlet air, heat source inlet and outlet brine,
evaporation, suction gas, refrigerant liquid and hot water sensor
included in the scope of delivery
-
Refrigerant R 407 C for heating water temperatures up to 55 °C at
outside temperatures up to -7 °C
-
Min. outside temperature -15 °C
(constant mode)
Outer part
-
Air evaporator with enlarged lamella spacing, as well as under-
cooling coil, drip plate heating, bend and expansion valve
-
Whisper ventilator with highly efficient electronic motor
-
Weather-resistant design with snow protection roof
-
Colour: Light-grey (RAL 7035)
-
Condensation drainage on gravel bed