MHG Heating ThermSelect, Assembly, Commissioning And Maintenance Instructions

Page: 5 / 100

ThermSelect®
1. Safety
5/100
1.2 Intended use
The devices are intended as heat sources for closed warm water
central heating systems and for central warm water preparation. Any
other or more comprehensive use is not as intended.
MHG Heiztechnik does not assume any liability for consequential
damages. The risk will be borne by the owner of the equipment
alone.
MHG devices have been built in accordance with the applicable
standards and guidelines as well as the valid safety rules. However,
personal injuries or property damage may occur if not used properly.
To avoid hazards, the device may only be used:
-
For its intended purpose
-
In a proper condition, in terms of safety equipment
-
In compliance with the instructions for Assembly, Startup and
Maintenance, as well as the operating instructions
-
In compliance with the necessary maintenance activities
-
In compliance with the technologically required minimum and max-
imum values
-
If malfunctions that may compromise safety have been remedied
immediately
-
If all of the safety and warning signs attached on and in the device
are not removed and remain legible
CAUTION!
Device damage through weather impacts!
Electrical hazard through water and corrosion of the
enclosure and the components.
Therefore:
-
The internal unit may not be operated outdoors. It is
suitable only for operation in rooms.
CAUTION!
System damage from frost!
The heating system can freeze in case of frost.
Therefore:
-
Leave the heating system in operation during a
frost period, so that the rooms are sufficiently tem-
pered. This also applies in the case of the opera-
tor's absence or if the rooms are vacant.