MHG Heating 98.30000-6324 Instructions To Assembly-Startup-Maintenance Download Page 72 | Manualshive

Page: 72 / 92

background image

10. Warranty

ThermiStar L .. SP 01/03/10

72

10

Warranty

10.1 Warranty

Limit of liability

All specifications and information in these installation instructions
were compiled under consideration of the applicable standards and
regulations, the state of technology as well as our experience and
insights of many years.

MHG Heiztechnik does not assume any liability for damages due to:

-

Neglecting to follow the instructions for assembly, startup and
maintenance as well as the operating instructions

-

Use other than intended

-

Employment of untrained personnel

-

Unauthorized modifications

-

Technical changes

-

Use of unapproved spare parts

-

Inappropriate change of refrigerant dosage

-

Faulty production of refrigerant circulation

The actual scope of delivery may deviate from the explanations and
representations described here due to special designs, additional
ordering options or latest technical changes.

Copyright protection

These instructions are copyright protected by MHG Heiztechnik.
Copying in any type and format – even in excerpts – as well as the
use and/or publication of the content or parts thereof are not
permitted without written release authorization by MHG Heiztechnik.
Infringements are liable to damage compensation. Additional claims
are reserved.

The instructions are to be treated confidentially. They are
exclusively intended for persons working with the device. Leaving
the instructions to a third party without written approval of the
manufacturer is not permitted.

The instructions shall remain with the heating device to allow them
to be used at a later time, if needed. MHG is not liable for damages
resulting from disregard of these instructions.

NOTE!
The content, texts, drawings, illustrations and other
presentations are protected by copyright and subject
to commercial property rights. Any misuse is
punishable by law.

«
...
70
71
72
73
74
...
»

Summary of Contents for 98.30000-6324





























































































Reviews:

No comments

Related manuals for 98.30000-6324

Brand: Waterous Pages: 10

Brand: PAPILLON Pages: 22

Brand: Zoeller Pages: 8

Brand: DAB Pages: 12

PacificHydrostar 2" Gasoline Powered Clear Water...

Brand: Pacific hydrostar Pages: 24

Nano-Flow 2,600

Brand: Cobalt Digital Inc Pages: 2

Brand: A.O. Smith Pages: 44

Basement Sentry 507

Brand: Zoeller Pages: 8

Brand: Daikin Pages: 44

Brand: Uberhaus Pages: 8

SkyAir RZR-P Series

Brand: Daikin Pages: 202

Brand: Wacker Neuson Pages: 68

Brand: Pfeiffer Vacuum Pages: 60

PACIFIC HYDROSTAR 1/3 HP Submersible Sump Pump with Vertical Float...

Brand: Pacific hydrostar Pages: 9

Brand: PARAGON OUTDOOR Pages: 19

Brand: umbra pompe Pages: 46

Brand: Johnson & Starley Pages: 32

MAA1020H-MAA1024H MAA1030H

Brand: Marvair Pages: 51

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands