MHG Heating 98.30000-6324, Instructions To Assembly-Startup-Maintenance

Page: 34 / 92

6. Assembly
ThermiStar L .. SP 01/03/10
34
6.3 Assembly tools
The assembly and maintenance of the heating system requires
standard tools from the field of heating installations, cooling installa-
tion technology, as well as water systems installations.
6.4 Assembly information
CAUTION!
Environmental damage through substances
hazardous to groundwater!
Substances hazardous to groundwater, such as
greases, oils, refrigerants, solvent-based cleaning
agents and the like, can burden the ground or get
into the sewage system.
Therefore:
-
These substances must be collected, stored and
transported in suitable containers and be disposed
off.
The regulations of the heating and plumbing trade (DVGW, DIN,
etc.) and of electrotechnics (potential equalization, utility company
connection conditions, DIN, VDE, etc.) must be followed in
particular.
Transport
NOTE!
The heat pump may only be transported standing and
never horizontally.
The heat pump is delivered standing on a wooden pallet. It can be
transported on the pallet to the installation site.
The heat pump can also be transported by 2 persons with carrying
straps or transport cart.
CAUTION!
Device damage through improper handling!
The copper pipes can be easily bent!
Therefore:
-
Do not hold on to the insulated pipe (hot gas line)!
-
Apply force only to the base plate or the frame!