Wall formwork
Mammut 350
Hinged corners
Acute and obtuse angled corners
are formed using hinged inside
and outside corners (Fig. 25.1).
At the outside corner, align-
ment rails must be attached to
the multi-function profiles with
flange screws.
Timber fillers and Uni-assembly
locks are used for length com-
pensation (Figures. 25.1 and
25.3).
The hinged outside and inside
corners can be set to an angle
of 70°, 90°, 120°, 135° or 180°
with a locking device (Fig. 25.2).
Side length
Æ
Outside corner 12.5 cm
Æ
Inside corner 40 cm
Adjustment range
60° to 180°
Fig. 25.1
Fig. 25.2
Fig. 25.3
Locking device
Locking device
Wooden blocking
Bolt M18x100
Timber filler with Uni-assembly lock
Alignment rail
Welded hexagonal nut for tying
the hinged inside corner
22.6
70°
22.6
90°
16
90°
16
120°
22.6
135°
16
135°
22.6
22.6
16
WT
40
12.5
40
WT = wall thickness
Description
Ref. No.
M 350 hinged corner
outside 350/12.5 ...................
23-137-70
inside 350/40 ........................
23-137-30
M hinged corner
outside 300/12.5 ...................
23-137-71
inside 300/40 ........................
23-137-31
outside 250/12.5 ..................
23-137-81
inside 250/40 ........................
23-137-41
outside 125/12.5 ..................
23-137-91
inside 125/40 ........................
23-137-51
M350-25
Technical Instruction Manual / Status November 2018
