Wall formwork
Mammut 350
Length compensation
Fig. 36.1
Fig. 36.2
Fig. 36.3
Fig. 36.4
Fig. 36.5
Description
Ref. No.
Uni-assembly lock 22 .............
29-400-85
Uni-assembly lock 28 .............
29-400-90
M timber profile 350/21 .........
29-400-02
M timber profile 300/21 .........
29-400-05
M timber profile 250/21 .........
29-400-15
M timber profile 125/21 .........
29-400-17
M 350 aluminium filler
350/5....................................
29-300-30
300/5....................................
29-300-32
250/5....................................
29-300-35
125/5....................................
29-300-40
Timber filler
Gaps up to 10 cm can be filled
on-site using timber fillers and
Uni-assembly locks 22, while for
gaps up to 16 cm timber fillers
and Uni-assembly locks 28 are
used. The compensation areas
are reinforced with alignment
rails, which must always be
attached to the panels’ multi-
function profiles.
Timber profile
Timber profiles are used for gaps
exceeding 17 cm. A facing is
cut to size and attached to the
timber profiles. Reinforcement
is achieved using alignment rails
which are attached to the tie
holes of the multifunction pro-
files with articulated flange nuts
(Figures 36.1 and 36.2).
For problem areas, job-built
formwork is attached to the pan-
els using M timber profiles and
M assembly locks (Figures. 36.3
to 36.5).
M350-36
Technical Instruction Manual / Status November 2018
