Wall formwork
Mammut 350
Fig. 66.1
The crane slings (Fig. 66.1) help
to quickly load and unload trucks
and move panel stacks near the
ground. The lifting hooks are
inserted into the welded sleeves
of the bottom panel frame. After
tightening the crane slings, check
that the hooks are safely locked
(Fig. 66.3).
Attention
A lifting hook must only be used
if its eccentric is easy to turn or
falls automatically into the locked
position (Fig. 66.3). Never use
a lifting hook if you need force
to turn its eccentric. Turning the
eccentric with force may not lock
the lifting hook but only make it
appear to be in the locked posi-
tion. This may cause the lifting
hook to slip when lifting the
panel stack.
Technical data
Æ
Max. load 20 kN (2 tons).
Æ
Max. stack height: Three
M 350 panels 350/250 or ten
M 350 panels with a max. width
of 125 cm.
Fig. 66.3
Fig. 66.2
Description
Ref. No.
Crane sling 60 ......................
29-401-45
Locked position
Crane slings 60
Appr
ox. 0.60 m
Appr
ox. 5.00 m
M350-66
Technical Instruction Manual / Status November 2018
