Wall formwork
Mammut 350
Differences in height
The assembly lock can be
attached at any position on the
frame profile (Fig. 44.1). The
formwork’s grid-free design does
not require additional accessories
for panel connection. Vertical,
horizontal and inclined panels
can all be safely and firmly con-
nected with M assembly locks,
even with differences in height.
A job-built length compensation
is produced using timber profiles
and an alkus facing cut to the
size required or a wooden board.
If required, use square timbers
for reinforcing. A compensation
larger than 36 cm requires a
centred square timber to support
the facing.
Square timbers and the facing
are simply connected with M
assembly locks. Pay special atten-
tion when using wood fillers (see
page M350-35). It may be neces-
sary to use alignment rails and/or
wooden blockings.
Fig. 44.1
Fig. 44.2
Timber
M timber profile
Timber
M timber profile
M350-44
Technical Instruction Manual / Status November 2018
