52
7. TO SET UTILITY FUNCTION
With the Utility function, the user can set the parameters of the generator such as Sync, Interface, System Setting, Self Test and
Frequency Counter, etc.
Press
[Utility]
to enter the utility menu, as shown in Figure 61 and Figure 62.
Figure 61: Utility Setup Interface (Page 1/2)
Function Menu
Settings
Explanations
System
Set the system configuration.
Test/Cal
Test and calibrate the instrument.
Counter
Frequency counter setting.
Output Setup
Set the output parameters of CH1 and CH2.
CH Copy Coupling
Set the track, channel coupling or channel copy function.
Page 1/2
Go to the next page.
Table Menu Explanations of Utility (Page 1/2)
Figure 62: Utility Setup Interface (Page 2/2)
Function Menu
Settings
Explanations
Interface
Set the parameters of remote interfaces.
Sync
Set the sync output.
CLKSource
Internal
Choose the system clock source.
External
Phase Mode
Choose Phase-locked or independent mode.
OverVoltage Protection
Turn on/off the overvoltage protection function.
Page 2/2
Return to the previous page.
Table Menu Explanations of Utility (Page 2/2)