27
To select the built-in Arbitrary Waveform
There are plenty of built-in Arbitrary Waveforms and user-defined Arbitrary Waveforms inside the generator. To select one of them,
follow the instructions below.
1.
To select the
Built-in Waveform
Choose
[Waveforms] → [Page 2/2] → [Arb] → [Arb Type] → [Buit-in]
to enter the following interface, as shown in Figure 37.
Figure 37: Built-in Arbitrary Waveforms
Press
Common
,
Math
,
Engine
,
Window
,
Trigo
or other menus to switch to the desired category (the selected category in the
menu bar is highlighted), then rotate the knob to choose the desired waveform (the selected waveform is highlighted). Select
Accept or press the knob to recall the corresponding waveform.
1/2