13
5.
Press
[Waveforms]
key and then press
[Noise Stdev]
softkey. The generator can generate noise with a 60 MHz bandwidth. By
setting Stdev and Mean, noise with different parameters can be generated.
Figure 10: Noise Display Interface
6.
Press
[Waveforms]
key and then press
[Page 1/2]
, last press the DC softkey. The generator can generate a DC signal with a
level up to ± 10 V into a HighZ load or ± 5 V into a 50 Ω load.
Figure 11: DC Display Interface
7.
Press
[Waveforms]
key and then press
[Page 1/2]
, lastly press the
[Arb]
softkey.
The generator can generate repeatable arbitrary waveforms with 16 K points and frequencies up to 6 MHz. By setting Frequency/
Period, Amplitude/High level, Offset/Low level and Phase, an arbitrary waveform with different parameters can be generated.
Figure 12: Arbitrary Waveform Display Interface