16
4.5. TO USE COMMON FUNCTION KEYS
As shown in Figure 19, there are five keys on the operation panel which are labeled [Parameter], [Utility], [Store/Recall],
[Waveforms], and [Ch1/Ch2]. The instructions below will help to familiarize you with these functions.
Figure 19: Waveforms Utility and Parameter Key
1.
The
Parameter
key makes it convenient for the operator to set the parameters of basic waveforms directly.
2.
The
Utility
key is used to set the auxiliary system function, such as output configurations, interface setting, system setting
information, performing the instrument self-test and reading the calibration information, etc.
3.
The
Store/Recall
key is used to store and recall waveform data and configuration information.
4.
The
Waveforms
key is used to select basic waveforms.
5.
The
Ch1/Ch2
key is used to switch the currently selected channel between CH1 and CH2 After start-up, CH1 is selected as
default. At this point, press the key to select CH2.