42
To Set Pulse Width/Duty Deviation
Width Deviation represents the variation of the modulated waveform pulse width relative to the original pulse width. Press
[Width
Dev]
to highlight the parameter, and use the numeric keyboard or arrow keys and knob to input the desired value, as shown in
the Figure 48.
Figure 48: Width Deviation Setting Interface
The width deviation cannot exceed the current pulse width.
The width deviation is limited by the minimum pulse width and current edge time setting.
5.10. TO SET SWEEP FUNCTION
In the sweep mode, the generator steps from the start frequency to the stop frequency in the sweep time specified by the user.
The waveforms that support sweep include sine, square, ramp and arbitrary.
Press
[Sweep]
key to enter the following menu. Set the waveform parameters by using the operation menu.
Figure 49: Setting Interface of Sweep (Page 1/2)