MI 3311 GammaGT
Communication
55
8 Communication
The instrument can communicate with the PAT Link PRO PC software. The following
actions are supported:
Saved results can be downloaded and stored to a PC.
Checkbox results can be downloaded and stored to the PC.
Custom Auto sequences can be uploaded to the instrument.
A special communication program on the PC automatically identifies the instrument and
enables data transfer between the instrument and the PC.
There are two communication interfaces available on the instrument: USB or RS 232.
The instrument automatically selects the communication mode according to the detected
interface. USB interface has priority.
How to transfer stored data:
RS 232 communication: connect a PC COM port to the instrument PS/2 connector
using the PS/2 - RS232 serial communication cable.
USB communication: connect a PC USB port to the instrument USB connector
using the USB interface cable.
Switch on the PC and the instrument.
Run the PATLink PRO program.
The PC and the instrument will automatically recognize each other.
The instrument is prepared to upload / download data to the PC.
Note:
USB drivers should be installed on PC before using the USB interface. Refer to
USB installation instructions available on installation CD.
