MI 3311 GammaGT
Autotest sequences
45
6.4 Code Autotest
Code Autotest menu supports operation with pre-defined test codes, barcodes and RFID
tags.
The instrument supports the following functions:
manual selection of pre-defined autotest shortcut codes;
reading pre-defined autotest shortcut codes from barcode labels;
reading pre-defined autotest shortcut codes from RFID tags;
reading appliance ID numbers from barcode labels;
reading appliance ID numbers from RFID tags;
reading pre-defined autotest shortcut codes and appliance ID numbers from
barcode labels (double barcode format);
programming empty RFID tags.
Refer to Appendix A Barcode formats for more information regarding barcode labels.
Reading a Code autotest sequence (with barcode reader, RFID reader/writer or
manually)
Connect barcode reader or RFID reader/writer to the instrument RS232 / PS2 connector
first.
Figure 6.16: Connection of the barcode reader and RFID reader/writer
Select Code Autotest
in Main menu. The latest received or set autotest sequence name
and its code is displayed. A new autotest sequence (received from the barcode reader or
RFID reader/writer) will be accepted by the instrument (refer to Appendix for available
autotest sequences and its codes). A successful receive of the barcode or RFID tag is
confirmed by two short confirmation beeps.
Figure 6.17: Code autotest menu
The autotest sequence and its code can be also set manually.
Keys:
/
Manually selects autotest sequence by setting its code.
TEST
Starts selected autotest sequence. Refer to chapter
6.5 Carrying out
(Code, Simple and Custom) autotest sequences
.
ESC
Returns to Main menu.
