MI 3311 GammaGT
Autotest sequences
48
6.5.5 Insulation resistance - P measurement
The test is offered if it is applicable according to the autotest setting. The Insulation
resistance - P starting screen is displayed first. Measurement and options in Insulation
resistance - P starting screen are described in chapter
5.2.4 Insulation resistance - P
.
Figure 6.25: Insulation resistance - P starting screen
After the measurement is carried out the Insulation resistance - P result screen is
displayed.
Figure 6.26: Insulation resistance - P result screen
Options in Insulation resistance - P result screen:
NEXT
Proceeds with the next measurement.
REPEAT
Repeats the test (use in case of multiple isolated/SELV/PELV
accessible points). Lowest result will be stored.
6.5.6 Substitute Leakage - P measurement
The test is offered if it is applicable according to the autotest setting. The Substitute
leakage - P starting screen is displayed first. Measurement and options in Substitute
leakage - P starting screen are described in chapter
5.2.6 Substitute leakage - P
.
Figure 6.27: Substitute leakage - P starting screen
After the measurement is carried out the Substitute leakage - P result screen is displayed.
Figure 6.28: Substitute leakage - P result screen
Options in Substitute leakage - P result screen:
NEXT
Proceeds with the next measurement.
REPEAT
Repeats the test (use in case of multiple isolated/SELV/PELV
accessible points). Highest result will be stored.
