Metek EX1200A SERIES, User Manual

Page: 111 / 163

www.vtiinstruments.com
EX1200A Web Page Operation 111
Use of the entry-type web pages in the EX1200A are governed by a common set of operational
characteristics:

Pages initially load with the currently-entered selections displayed.

Each page contains a Submit button to accept newly entered changes. Leaving a page before
submitting any changes has the effect of canceling the changes, leaving the instrument in its
original state.

Navigation through a parameter screen is done with the Tab key. The Enter key has the same
function as clicking the Submit button and cannot be used for navigation.
VTI Instruments Logo
The VTI Instruments logo that appears on the upper left of all EX1200A web pages is a link to the
VTI Instruments corporate website:
http://www.vtiinstruments.com .
S
OFT
F
RONT
P
ANEL
M
AIN
P
AGE
The Soft Front Panel page displays a list of instruments that are available to command in the
EX1200A series chassis. After selecting an instrument, the soft front panel specific to that
instrument will appear. An example of the EX1200A SFP page can be seen in Figure 7-3.
F
IGURE
7-3: EX1200A S
OFT
F
RONT
P
ANEL
M
AIN
P
AGE

Slot : Indicates the slot number of the module that is being described in the row. This
corresponds with the slot number in the virtual mainframe above.

Type : Provides a general description of the plug-in module installed in the given slot.

Model : Indicates the model number of the plug-in module installed in the given slot.

Soft Front Panel : Provides a Launch SFP hyperlink that causes the plug-in module’s SFP to
be shown.

Revision : Indicates the plug-in module’s firmware revision number.