Metek EX1200A SERIES, User Manual

Page: 37 / 163

www.vtiinstruments.com
EX1200A Series Preparation for Use 37
Rack Ears, Half Rack Width Option (P/N: 70-0373-101)
The tabletop installation option can be used when an EX1202A is not installed in a rack, but will
be employed as a bench top or desktop instrument.
Required Tools
1) #2 Phillips screwdriver
Parts List
Item# Qty Description VTI P/N
1 1 Bracket, Rack Ear, Single Half Rack, EX1202A 41-0493-009
2 1 Bracket, Long Rack Ear, Single Half Rack, EX1202A 41-0493-011
3 10 Screw, 6-32 x ¼”, F/H Undercut Phillips, Zinc 37-0114-025
Assembly Procedure
1) Place the chassis on a protected work surface with its input connectors facing front.
2) Using a #2 Phillips screwdriver, install the rack ears (P/N: 41-0482-009 and 41-0493-011) on
the front of the EX1202A using five (5) 6-32 x 3/8” flat head Phillips stainless steel screws
(P/N: 37-0114-025) per rack ear. Note that the “Optional Mounting Locations” in Figure 2-4
allow the EX1202A to be installed in a rack either flush or recessed.
3) Place the EX1202A in the desired rack slot and secure the front rack ears with hardware
provided with the rack.
F
IGURE
2-4: R
ACKMOUNT
E
ARS
I
NSTALLATION
D
IAGRAM
(E
XPLODED
F
RONT
V
IEW
)