Speaker chamber
M2 threaded rods preparation
Install one M2 nut on each M2 threaded rod
end
(2x).
Y
ou need two 135mm long M2 rods.
The third one is shorter and will be installed later!
Use
Loctite 648
to glue them in position. Let it dry over night.
These three rods have to be installed before the speaker chamber
is screwed on...
Speaker-Chamber mounting hole tapping
Seven holes in the back of Part 05 need 1.2M threads.
Use a M1.2 tap set of three.
Drill the holes to 1mm and cut the threads.
Use the tap guide!
Link
If you have problems to get a M1.2 tap like this: [email protected]
Polishing the back of part 05
Polish the back of Part 05 to a mirror finish. This effects the brightness of the speaker chamber
accent LED.
19
