Emitter Glass-Eye adapter
-
Push the Glass-Eye adapter into position.
-
Mount it with two
M1.6 cylinder head screws
.
Emitter Add-On D
-
Separate all Add-On D parts and check for fit.
-
Add brass wire details and Install each part with a
M1.6 countersunk screw
.
Emitter Add-On E
-
Separate both Add-On E parts.
Tip:
Insert two long 1mm rods into each piece first. So that they don't get lost.
-
Glue two short (2cm) 1mm Brass rods into the designated mounting holes on the Emitter.
Use Loctite 648
-
Put the printed parts
loos
onto the installed rods.
-
Attach the brass wire details.
-
Adjust the position. When everything looks good add
Loctite 648
The Emitter now should look like this:
56
