Soundboard cover Metal Master 06 (steel)
Some areas of the soundboard cover
Metal
Master 06
need special attention.
The area around the “light holes” inside the
cover need to be sanded carefully to make
sure the LED holder fits. This area has to be
nice and smooth.
Other areas at the holders must be sanded to
make the cover fit on the main part
Metal
Master 05.
Check the fitting first. Then decide where and
how much material has to be removed. Each
steel print is different.
Plasma Gate Part 01 and Part 02
All areas marked in
red
have
to be sanded to make the
steel parts fit.
Take your time to make everything fit together...
17
