There are different smd LED holder available...
The six-pack is designed for the top cover with six light holes V1. All other smd LED holder can be
used with all Metal Master top covers.
One version is for one 3mm
LED.
The single holder are
available for
one, two or
four smd LEDs
. You can also
combine them.
Oled accent LEDs
The
Part06 Oled
has his own accent LED holder design. It´s designed for
0805 SMD
LEDs. It also
has slots for 0603 smd resistors for each LED.
1.
Glue the smd LEDs into
the slots. Pay attention to
the orientation.
2.
Add the resistors and
solder them to the LEDs.
3.
Add a long pin to
connect all negative poles.
Solder it to each LED.
4.
Solder AWG 34 wires to
each resistor and one to
the pin.
5.
Cover everything with
liquid rubber.
33
