- 50 -
U.motion KNX Server Plus, Touch
Installation Manual
5.7
KNX
O
BJECT
P
ROPERTIES
5.7.1
KNX
O
BJECT
D
ETAILS
If a KNX object is selected in the navigation menu or through the search function and the EDIT button is clicked, the
following screen will appear:
This page allows modifying all settings of the selected object and its relations to other objects present in the visualisation.
The first part of this configuration page contains all specific settings regarding the object itself. In BASE mode the
following settings are accessible (as also shown in the screenshot):
NAME
Name of the object, which identifies it within the software. During the import process,
the name of the corresponding group address from the ETS project is taken over; this
setting can be changed here, if needed.
GROUP ADDRESS
Main group address used by the object for the communication with the KNX-bus; this
setting can’t be changed, but its value can be used as keyword for the search engine.
FUNCTION
Category to which the object belongs to; the selection here determines which icons
are available in the next option. It is also possible to assign the object to no function, if
the object should not be listed inside any FUNCTIONS page in the VISUALISATION.
ICON
In a popup window the icon can be selected, through which the object will be shown
in the VISUALISATION. The available icons depend on the type of the KNX object and
the function assigned to it. If "None" is defined as function, all icons matching the type
of the KNX object will be available.
