- 75 -
U.motion KNX Server Plus, Touch
Installation Manual
The “DISPLAY” is an area for showing status and feedback information of KNX objects. It is divided in the following
sections:
DISPLAY-VALUE CENTER
Value shown in the center of the display area
DISPLAY-VALUE UP/LEFT
DISPLAY-VALUE UP/RIGHT
DISPLAY-VALUE DOWN/LEFT
DISPLAY-VALUE DOWN/RIGHT
Value displayed in the configured corner of the display area.
Each value can be displayed in combination with a selectable label.
The MAIN AREA can contain up to 10 objects, which will be positioned one under the other. If a label is defined for one
of these objects, it will be displayed above the corresponding object in the MAIN AREA.
The lower section allows adding up to 30 additional objects, structured in 3 tabs, where each tab can contain up to 10
objects. If a label for an object is defined, this label will be shown above the corresponding object. Switching between the
various tabs is done by clicking on the label of the corresponding tab; tabs not containing any objects won’t be dis-
played.
Display
Main area
Tab 1
Tab 2
Tab 3
Labels