- 49 -
U.motion KNX Server Plus, Touch
Installation Manual
.
After the successful creation of the file, please select “ETS IMPORT” from the “KNX” section in the administration menu
and load the file in the same way as described for the ETS import:
After starting the import procedure by clicking on the “NEXT” button, the objects are created automatically just as during
the standard import procedure. Even in this case the matching import rules are applied and at the end the list of non-
matching objects will be shown for manual configuration. As a difference to the classic ETS import, the bit length of the
objects (if not specified in the third column of the CSV file) has to be set manually. This information is not added by the
ETS export.
The CSV import can be useful above all when you want to create / import group addresses manually into
U.motion KNX Server Plus Touch, without using ETS. In this case you will just have to create a CSV file with the
corresponding name and group addresses and import it.
