- 101 -
U.motion KNX Server Plus, Touch
Installation Manual
12.3
A
XIS
C
AMERAS AND
V
IDEOSERVER
U.motion KNX Server Plus Touch offers native support for all cameras and videoserver of the brand AXIS; further details
on the available models as well as the product catalogue can be found on
In order to configure an AXIS camera / videoserver in U.motion KNX Server Plus Touch, please follow the steps below:
•
Please access the configuration area of U.motion KNX Server Plus Touch
•
Please select “TECHNOLOGIES”
“VIDEO SURVEILLANCE”
•
Click on the ADD button to create a new camera and access its configuration window through the EDIT function
•
Please select “AXIS (MJPEG)” as video format:
•
Please select “AXIS (MJPEG)” as video format:
IP ADDRESS
Local IP address of the camera / videoserver
IP PORT
IP port through which the video stream can be accessed.
Please select port 80 for the HTTP protocol or 443 for the
HTTPS protocol, except the camera is using a special
configuration
PROTOCOL
Please select HTTP or HTTPS, depending on the port
number specified before (normally HTTP)
CHANNEL
Number of the channel transferring the video signal; please
only specify a value when you are using a videoserver with
more than one channel (in this case, for each channel of
the videoserver a camera object has to be created)
RESOLUTION
Please specify the resolution of the camera signal that
U.motion KNX Server Plus Touch should request from the
camera
The supported resolutions can be found within the manual
