- 79 -
U.motion KNX Server Plus, Touch
Installation Manual
9
S
CENARIOS
9.1
I
NTRODUCTION
This chapter describes the extensive possibilities offered by the SCENARIOS in U.motion KNX Server Plus Touch. With
SCENARIOS, different sequences can be created, which can be launched manually, through a scheduling or depending on
events.
The SCENARIOS must not be confused with the "KNX SCENARIOS". The "KNX SCENARIOS" (also called “light
scenes”) are basically KNX objects that write a numeric value to the KNX bus and are already created in the
ETS-project. The SCENARIOS of U.motion KNX Server Plus Touch are part of the software and are not
integrated in the ETS project; they are stored on U.motion KNX Server Plus Touch and also operate from
U.motion KNX Server Plus Touch. Those SCENARIOS are much more flexible than the "KNX SCENARIOS"
because the software offers more possibilities for the SCENARIOS as only writing a numeric value on the KNX
bus.
9.2
C
REATE
S
CENARIOS
To create a new scenario:
•
Open the ADMINISTRATION area of U.motion KNX Server Plus Touch
•
In the navigation menu choose “VISUALISATION“→ „SCENARIOS“
•
Press the ADD-button
The new created SCENARIO will appear in the navigation menu and can be opened in a new tab for configuration:
