- 84 -
U.motion KNX Server Plus, Touch
Installation Manual
9.5
C
USTOMIZATION OF THE
W
AIT
C
OMMANDS
Objects of the type “WAIT COMMAND”, which allow to insert delays into SCENARIOS, can be customized in the following
way:
•
Locate the desired WAIT COMMAND using the search function
•
Before modifying the WAIT COMMAND, create a clone using the corresponding button in the TOOLBAR (by
modifying the original WAIT COMMAND there is the risk that other functionalities using this WAIT COMMAND
could stop working as desired)
•
Access the configuration window of the cloned WAIT COMMAND
The configuration window of a WAIT COMMAND permits to configure HOURS, MINUTES and SECONDS, through which
the desired delay can be created. Please fill in only integer values; furthermore the overall time must be between 1
second (minimum delay) and 23 hours, 59 minutes, 59 seconds (maximum delay).
The configuration window also gives you an overview in which scenarios the current WAIT COMMAND is included. Please
do not use this area to add the command to further scenarios. Instead, always drag the WAIT COMMAND into the
configuration page of the scenario.
The WAIT COMMANDS can also be integrated into the visualisation (into rooms as well as into complex objects). This has
the advantage that also the final user will be able to change the value of the WAIT COMMAND, without needing the
permission to access the ADMINISTRATION. The following screenshot shows the representation of a WAIT COMMAND in
a room with GRID view:
When WAIT COMMANDS are added to the VISUALISATION, it is even more important that you only work with
CLONED objects. Otherwise there is the risk that the final user unintentionally changes also the way other
functions / scenarios work.
