Mercedes-Benz S-Class, Operator'S Manual

Page: 71 / 586

#
Guide Top Tether belt 4 under head
restraint 1 between the two head restraint
bars.
#
Hook Top Tether hook 5 of Top Tether belt
4 into Top Tether anchorage 3 without
twisting.
#
Tension Top Tether belt 4 . In doing so, com‐
ply with the child restraint system manufac‐
turer's installation instructions.
#
If necessary, slide head restraint 1 down‐
wards (
/
page 118). Make sure that you do
not interfere with the correct routing of Top
Tether belt 4 .
Vehicles with rear airbag
Notes on rearward-facing and forward-facing
child restraint systems on the left and right
rear seat
Sticker visible when the rear door is open
When installing a child restraint system, the rear
airbag can be disabled.
If using a forward-facing child restraint sys‐
tem with enabled rear airbag: make sure that
the child's feet are not placed in front of the rear
airbag cover or on the seat backrest. The child's
legs can otherwise be thrown up if the rear air‐
bag is deployed.
Enabling/disabling the rear airbag
The rear airbag can be enabled or disabled via
the multimedia display (
/
page 58).
Securing the child restraint system with the
seat belt
Securing the child restraint system with the
seat belt on the rear seat
When installing a belt-secured child
restraint system, observe the following:
O Always comply with the manufacturer's
installation and operating instructions for
the child restraint system used.
O When using a weight category 0/0+
baby car seat and a weight category I
rearward-facing child restraint system
on a rear seat: adjust the front seat so that
Occupant safety 69