Mercedes-Benz S-Class, Operator'S Manual

Page: 346 / 586

#
To reduce the tire pressure: press pressure
release button 1 next to manometer 2 .
#
When the tire pressure is correct, unscrew
the filling hose from the valve of the sealed
tire.
#
Screw the valve cap onto the valve of the
sealed tire.
#
Pull the tire sealant bottle out of the tire
inflation compressor.
The filling hose stays on the tire sealant bot‐
tle.
#
Drive to the nearest qualified specialist work‐
shop and have the tire, tire sealant bottle
and filling hose replaced there.
Battery (vehicle)
Notes on the 12 V battery
& WARNING Risk of an accident due to
work carried out incorrectly on the bat‐
tery
Work carried out incorrectly on the battery
can, for example, lead to a short circuit. This
can restrict functions relevant for safety sys‐
tems and impair the operating safety of your
vehicle.
You could lose control of the vehicle in the
following situations in particular:
R
When braking
R
In the event of abrupt steering maneuvers
and/or when the vehicle's speed is not
adapted to the road conditions
#
In the event of a short circuit or a simi‐
lar incident, contact a qualified special‐
ist workshop immediately.
#
Do not drive on.
#
Always have work on the battery carried
out at a qualified specialist workshop.
R
Further information on ABS (
/
page 217)
R
Further information on ESP
®
(
/
page 218)
For safety reasons, Mercedes-Benz recommends
that you only use batteries which have been tes‐
ted and approved for your vehicle by Mercedes-
Benz.
All vehicles except vehicles with a lithium-
ion battery
& WARNING Risk of explosion due to elec‐
trostatic charge
Electrostatic charge can ignite the highly
explosive gas mixture in the battery.
#
To discharge any electrostatic charge
that may have built up, touch the metal
vehicle body before handling the bat‐
tery.
344 Breakdown assistance