Mercedes-Benz S-Class, Operator'S Manual

Page: 158 / 586

Switching on high beam
#
Turn the light switch to the L or Ã
position.
#
Push the combination switch in the direction
of arrow 1 .
When the high beam is activated, the L
indicator lamp for low beam will be deactiva‐
ted and replaced by the K indicator lamp
for high beam.
Switching off high beam
#
Push the combination switch in the direction
of arrow 1 or pull it in the direction of arrow
3 .
High-beam flasher
#
Pull the combination switch in the direction
of arrow 3 .
Turn signal light
#
To indicate briefly: push the combination
switch briefly to the point of resistance in the
direction of arrow 2 or 4 .
The corresponding turn signal light will flash
three times.
#
To indicate permanently: push the combi‐
nation switch beyond the point of resistance
in the direction of arrow 2 or 4 .
Vehicles with Active Lane Change Assist:
R
A turn signal indicator activated by the
driver may continue to operate for the
duration of the lane change.
R
If the driver indicated directly beforehand
but a lane change was not immediately
possible, the turn signal indicator may
activate automatically.
Activating/deactivating the hazard warning
lights
#
Press button 1 .
The hazard warning lights will switch on auto‐
matically if:
R
The airbag has been deployed.
156 Light and visibility