Mercedes-Benz S-Class, Operator'S Manual

Page: 69 / 586

Contact with the roof when the head
restraint is fully extended and locked in
place will not result in any restrictions on
use.
O
The child restraint system must not be put
under strain between the roof and the seat
cushion and/or be installed facing the
wrong direction. Where possible, adjust the
seat cushion inclination accordingly.
O The child restraint system must not be put
under strain by the head restraint. Adjust
the head restraints as appropriate.
Before every journey, make sure that the LATCH-
type (ISOFIX) child restraint system is engaged
correctly in both mounting brackets in the vehi‐
cle.
* NOTE Damage to the seat belt for the
center seat during installation of the
child restraint system
#
Make sure that the seat belt is not trap‐
ped.
#
Vehicles with reclining rear seats: Tilt the
backrest of the reclining rear seat back
slightly before the LATCH-type (ISOFIX) child
restraint system is installed.
#
Fold upholstered lining 1 upwards.
#
Pull the tab on upholstered lining 1
upwards and position it on the supporting
surface.
Upholstered lining 1 will remain folded
upwards.
#
Attach the LATCH-type (ISOFIX) child
restraint system to both mounting brackets
2 in the vehicle.
#
To close, fold upholstered lining 1 upwards.
#
Lift the tab from the support surface and
slide it back into the upholstery slot between
Occupant safety 67