Mercedes-Benz S-Class, Operator'S Manual

Page: 33 / 586

for compliance could void the user's authority to
operate the equipment."
Canada: "This vehicle contains license-exempt
transmitter(s)/receiver(s) that comply with Inno‐
vation, Science and Economic Development Can‐
ada’s RSS(s). Operation is subject to the follow‐
ing two conditions: (1) These devices may not
cause interference, and (2) These devices must
accept any interference, including interference
that may cause undesired operation of the
device."
Charging unit for wireless charging of mobile
devices (WMI)
This equipment complies with FCC and IC radia‐
tion exposure limits set forth for an uncontrolled
environment. This equipment should be installed
and operated with a minimum distance of 0 cm
(in contact) between the radiator and your
body. This transmitter must not be co-located or
operating with any other antenna or transmitter.
USA: "Wireless charging system for mobile devi‐
ces (Model: D-WMI2015A): This Device complies
with Part 18 of the FCC Rules."
The name and address of the party responsible
is:
Continental Automotive Systems US Inc.
2400 Executive Hills Drive
Auburn Hills, MI 48326-2980
United States of America
Diagnostics connection
The diagnostics connection is a technical inter‐
face in the vehicle. It is used, for example, within
the scope of repair and maintenance work or for
reading out vehicle data by a specialist work‐
shop. Diagnostic devices should therefore only
be connected by a qualified specialist workshop.
& WARNING Risk of accident due to con‐
necting devices to the diagnostics con‐
nection
If you connect devices to the diagnostics
connection of the vehicle, the function of
vehicle systems and operating safety may be
impaired.
#
For safety reasons, we recommend that
you only use and connect products
approved by your authorized Mercedes-
Benz Center.
&
WARNING Risk of accident due to
objects in the driver's footwell
Objects in the driver's footwell may impede
pedal travel or block a depressed pedal.
This jeopardizes the operating and road
safety of the vehicle.
#
Stow all objects in the vehicle securely
so that they cannot get into the driver's
footwell.
#
Always install the floor mats securely
and as prescribed in order to ensure
that there is always sufficient room for
the pedals.
#
Do not use loose floor mats and do not
place floor mats on top of one another.
General notes
31