Vehicle
Vehicle functions
General information
In this menu, you can set the following vehicle
functions:
R
ECO
R
multicontour seat settings
R
rear window blind
R
EASY-ENTRY/EXIT feature
R
exterior lighting delayed switch-off
R
interior lighting delayed switch-off
R
ambient lighting
R
automatic folding mirror function
R
locator lighting
R
automatic locking feature
R
trunk lid opening height restriction
You can open the "Vehicle" menu in one of
two ways.
Opening the "Vehicle" menu from the
main area in the center of the display
:
"Vehicle" menu item
;
Main area
X
Select
Vehicle
in the main function bar by
sliding
XVY
and turning
cVd
the
COMAND controller and press
W
to
confirm.
Main area
;
is active.
X
Select the individual vehicle functions by
sliding
XVY
or turning
cVd
the COMAND
controller and press
W
to confirm.
Opening from the "Vehicle" menu
X
Select
Vehicle
in the main function bar by
sliding
XVY
and turning
cVd
the
COMAND controller and press
W
to
confirm.
The "Vehicle" submenu opens.
X
Select the individual vehicle functions in
the menu by sliding
XVY
or turning
cVd
the COMAND controller and press
W
to
confirm.
In the next section, it is the first procedure
that is always described.
Switching the ECO function on/off
i
Hybrid vehicles: the ECO start/stop
function cannot be switched off.
The ECO start/stop function switches the
engine off automatically if the vehicle is
stopped under certain conditions. When
pulling away again, the engine starts
automatically (
Y
page 310). You can switch
the ECO start/stop function on and off using
COMAND.
If you switch the ECO start/stop function off
using COMAND, the function is switched on
again automatically. This is the case if you
switch the ignition off and on again.
Vehicle
265
COMAND
Z
