guides you through the training with spoken
instructions.
X
Select
Vehicle
in the main function bar by
turning
cVd
the COMAND controller and
press
W
to confirm.
X
Select
System
by turning
cVd
the
COMAND controller and press
W
to
confirm.
X
Select
Voice Control
and press
W
to
confirm.
X
Select
Start New Individualization
and press
W
to confirm.
You see and hear a prompt asking whether
you would like further information.
X
Select
Yes
or
No
and press
W
to confirm.
If you select
No
, the first part of
individualization begins. You will be asked
whether you would like to train digits or
voice commands.
If you select
Yes
, you will see and hear
information on the individualization
process. The first part of individualization
then begins automatically.
X
To close the display: press
W
the
COMAND controller.
You will be asked whether you would like
to train digits or voice commands.
At the end of the first part, a prompt will
appear asking whether you wish to begin the
second part.
X
Select
Yes
or
No
and press
W
to confirm.
If you select
No
, individualization will be
canceled. The data from the first part is
stored automatically.
If you select
Yes
, the second part will begin.
Individualization is completed at the end of
the second part. You will see a message to
this effect. The data from the second part is
stored automatically.
Canceling the first or second part of
individualization
X
Confirm
Cancel
by pressing
W
the
COMAND controller.
A prompt appears asking whether you
really wish to cancel.
X
Select
Yes
or
No
and press
W
to confirm.
If you select
Yes
, individualization will be
canceled. The data from the part during
which you exited is not stored.
If you select
No
, the current part begins
again.
Deleting existing individualization data
X
Select
Vehicle
by turning
cVd
the
COMAND controller and press
W
to
confirm.
X
Select
System
and press
W
to confirm.
X
Select
Voice Control
and press
W
to
confirm.
X
Select
Delete Individualization
and
press
W
to confirm.
A prompt appears asking whether you
really wish to delete.
150
System settings
COMAND
