Mercedes-Benz EQS 2023, Operator'S Manual

Page: 209 / 590

R
below 31 mph (50 km/h): raises the vehicle to
off-road level +1 again
R
from 68 mph (110 km/h): switch to A
The ESP
®
settings in the drive programs ;
and A are designed for stability. Therefore,
choose one of these drive programs especially
when transporting roof loads, in trailer operation
and when the vehicle is fully loaded or fully occu-
pied.
Selecting the drive program
#
Press DYNAMIC SELECT button 1 on the left
or right.
The drive program selected will appear on the
driver's display.
%
In drive program F , some driving systems
are restricted in their function or not availa-
ble. When selecting drive program F , a
confirmation prompt therefore appears on the
central display before the drive program is
activated.
Configuring DYNAMIC SELECT in the MMS
Multimedia system:
4
©
5
Settings
5
Vehicle
5
DYNAMIC SELECT
Setting drive program I
#
Select = Individual .
#
Select and set a category.
Switching the reset display on/off
#
Activate or deactivate
Request at Start
.
% This function must be activated for each user
profile separately. Only when this function is
activated will the drive program and ECO
start/stop setting for the previous journey be
saved for the respective user profile.
Function on: the next time the vehicle is started a
prompt appears asking whether the last active
drive program should be restored. If the ECO
Driving and parking 207