#
Within around 15 seconds, press and hold the
î
button on the combination switch for
approximately three seconds (
/
page 166).
The wiper arms will move into the replacement
position.
Removing the wiper blades
#
Fold the wiper arms away from the windshield.
#
Hold the wiper arm with one hand. With the
other hand, turn the wiper blade away from
the wiper arm in the direction of arrow
1
as
far as it will go.
#
Press release button
2
.
#
Remove the wiper blade from the wiper arm in
the direction of arrow
3
.
Installing the wiper blades
#
Push the new wiper blade into the wiper arm
in the direction of arrow
1
until release knob
2
engages.
#
Make sure that the wiper blade is seated cor-
rectly.
#
Fold the wiper arms back onto the windshield.
#
Switch on the vehicle.
#
Press the
î
button on the combination
switch.
The wiper arms will return to their original
positions.
#
Switch off the vehicle.
%
Check the condition of the wiper blades regu-
larly and replace them in the event of visible
damage or ongoing smearing.
Maintenance display
There is a maintenance display at the tip of the
newly mounted wiper blade.
168 Light and visibility
Summary of Contents for EQS 2023
