Mercedes-Benz 2007 GL 320 CDI, Operator'S Manual

Page: 529 / 595

528
Practical hints
Flat tire
Lowering the vehicle
왘
Lower vehicle by turning crank coun-
terclockwise until vehicle is resting ful-
ly on its own weight.
왘
Remove the jack.
1
-
5
Wheel bolts
왘
Tighten the five wheel bolts evenly, fol-
lowing the diagonal sequence illustrat-
ed (1 to 5), until all bolts are tight.
Observe a tightening torque of
110 lb-ft (150 Nm).
왘
Store jack and all other vehicle tool kit
items back into the storage well.
Warning!
G
Have the tightening torque checked after
changing a wheel. The wheels could come
loose if they are not tightened to a torque of
110 lb-ft (150 Nm).
i
The removed road wheel cannot be stored in
the spare wheel well under the cargo compart-
ment floor, but should be transported in the car-
go compartment wrapped in a protective cover.
Vehicles with TPMS or Advanced TPMS*:
Do not activate the tire inflation pressure moni-
tor until a full size wheel/tire with functioning
sensor has been placed back into service on the
vehicle.