Mercedes-Benz 2007 GL 320 CDI, Operator'S Manual

Page: 527 / 595

526
Practical hints
Flat tire
Removing the wheel
1
Alignment bolt
왘
Unscrew upper-most wheel bolt and
remove it.
왘
Replace this wheel bolt with alignment
bolt
1
supplied with the tool kit
(
컄
page 495).
왘
Remove the remaining bolts.
왘
Remove the wheel.
Mounting the new wheel
1
Wheel bolt for 19" and 20" light alloy
wheels
2
Wheel bolt for Minispare wheel (locat-
ed in vehicle tool kit (
컄
page 495))
왘
Clean contact surfaces of wheel and
wheel hub.
Warning!
G
The jack is intended only for lifting the
vehicle briefly for wheel changes. It is not
suited for performing maintenance work
under the vehicle.
앫
Never start the engine when the vehicle
is raised.
앫
Never lie down under the raised vehicle.
!
Do not place wheel bolts in sand or dirt. This
could result in damage to the bolts and wheel
hub threads.
!
Wheel bolts
2
must be used when mount-
ing the Minispare wheel. The use of any wheel
bolts other than wheel bolts
2
for the Minispare
wheel will damage the vehicle’s brakes.
컄컄