Mercedes-Benz 2007 GL 320 CDI, Operator'S Manual

Page: 246 / 595

245
Controls in detail
3-zone automatic climate control*
Setting the temperature
왘
Press button
>
(
컄
page 232).
The indicator lamp on the button
comes on.
In display
e
(
컄
page 232), you will see
the
>
symbol followed by MODE .
왘
Set the desired temperature for the
rear passenger compartment using
temperature control
3
(
컄
page 243).
After approximately 3 seconds after
the last adjustment, the display switch-
es back to its standard display and the
indicator lamp on button
>
goes
out.
Adjusting air distribution
Use the air distribution controls
5
or
6
to adjust the air distribution for the rear
passenger compartment.
The symbols on the controls represent the
following functions:
Adjusting manually
왘
Press the desired air distribution con-
trol.
The indicator lamp on button
U
goes out.
Adjusting automatically
왘
Press button
U
while the engine is
running.
The indicator lamp on the button
comes on. The air distribution is adjust-
ed automatically.
Setting the temperature
Use temperature control
3
(
컄
page 243)
to separately adjust the air temperature of
the rear passenger compartment.
You should raise or lower the temperature
setting in small increments, preferably
starting at 72°F (22°C). The automatic cli-
mate control will adjust to the set temper-
ature as fast as possible.
i
You can also press the
>
button once
more to switch back to the standard display.
Symbol Function
Z
Directs air to the center air
vents
Y
Directs air to the footwells and
the side air vents
i
The rear automatic climate control will not
cool the air when the air conditioning is switched
off (
컄
page 241).