Mercedes-Benz 2007 GL 320 CDI, Operator'S Manual

Page: 171 / 595

170
Controls in detail
Control system
If conditions have occurred causing status
messages to be recorded, the number of
messages appears in the multifunction
display:
왘
Press button
k
or
j
.
The stored messages will now be
displayed in the order in which they
have occurred. For malfunctions and
warning messages, see “Vehicle status
messages in the multifunction display”
(
컄
page 451).
Should the vehicle’s system record any
conditions while driving, the number of
messages will reappear in the multifunc-
tion display
앫
when the SmartKey in the starter
switch is turned to position
0 or
removed from the starter switch.
or
앫
when you turn off the engine by
pressing the KEYLESS-GO* start/stop
button (
컄
page 70) in the starter
switch once and open the driver’s door
(this puts the starter switch in
position
0 , same as with the SmartKey
removed from the starter switch)
Settings menu
In the Settings menu there are two
functions:
앫
The function Reset to factory
settings? , with which you can reset all
the settings to the original factory
settings.
앫
A collection of submenus with which
you can make individual settings for
your vehicle.
왘
Press button
è
or
ÿ
repeatedly
until the Settings menu appears in the
multifunction display.
i
After you have scrolled through all recorded
status messages, the first recorded message
appears again.
i
The vehicle status message memory will be
cleared when you turn the SmartKey in the start-
er switch to position
1 or 2 , or when you press
the KEYLESS-GO* start/stop button once or
twice without depressing the brake pedal. You
will then only see high priority messages in the
multifunction display (
컄
page 451).