Mercedes-Benz 2007 GL 320 CDI, Operator'S Manual

Page: 198 / 595

197
Controls in detail
Automatic transmission
If you want the gear position to remain in
neutral position
N , e.g. when taking the
vehicle through an automatic conveyor
type car wash, observe the following
instructions.
Vehicles with SmartKey:
왘
With the vehicle at a standstill and the
ignition switched on shift the automatic
transmission to neutral position
N .
왘
If engaged, release the parking brake
(
컄
page 60).
왘
Switch off the ignition and leave the
SmartKey in the starter switch.
Vehicles with KEYLESS-GO*:
왘
With the vehicle at a standstill, depress
the brake pedal and keep it pressed.
왘
With the ignition switched on shift the
automatic transmission to park
position
P .
왘
Release the brake pedal.
왘
Remove the KEYLESS-GO* start/stop
button from the starter switch
(
컄
page 43).
왘
Insert the SmartKey with
KEYLESS-GO* into the starter switch.
왘
Switch on the ignition.
왘
Depress the brake pedal.
왘
Shift the automatic transmission to
neutral position
N .
왘
Release the brake pedal.
왘
If engaged, release the parking brake
(
컄
page 60).
왘
Switch off the ignition and leave the
SmartKey with KEYLESS-GO* in the
starter switch.
Warning!
G
When leaving the SmartKey or SmartKey
with KEYLESS-GO* in the starter switch, do
not leave children unattended in the vehicle.
It is possible for children to switch on the
ignition which could result in unsupervised
use of vehicle equipment.
A child’s unsupervised access to a vehicle
could result in an accident and/or serious
personal injury.
!
Coasting the vehicle, or driving for any other
reason in neutral position N can result in
transmission damage that is not covered by the
Mercedes-Benz Limited Warranty.