Mercedes-Benz 2007 GL 320 CDI, Operator'S Manual

Page: 205 / 595

204
Controls in detail
Transfer case
Switching LOW RANGE mode
The switch is located on the upper part of
the center console.
1
LOW RANGE switch
2
Indicator lamp
3
LOW RANGE display
Switching LOW RANGE mode on
(switching from HIGH RANGE to LOW
RANGE)
왘
Press LOW RANGE switch
1
.
Indicator lamp
2
flashes.
If the system senses that all conditions
are met, it will switch to LOW RANGE
mode. A chime sounds and the LOW
RANGE display
3
appears in the multi-
function display.
The indicator lamp
2
on the
LOW RANGE switch comes on continu-
ously, indicating that the LOW RANGE
mode has been activated.
Warning!
G
Always wait until the procedure of shifting
from HIGH RANGE to LOW RANGE – and
from LOW RANGE to HIGH RANGE – has
been entirely completed. During this proce-
dure do not:
앫
switch off the engine
앫
shift the automatic transmission into
another gear
If you do not wait until the shifting proce-
dure has been entirely completed then it
might not be correctly performed. The trans-
fer case might be in neutral, thus interrupt-
ing the transfer of power between the
engine and the drive axle.
The vehicle is then freely movable, even if a
gear has been selected, and could uninten-
tionally be set into motion – particularly on
up – or downhill grades. This could lead to
an accident and cause injury to yourself and
others.
Please observe related messages appearing
in the multifunction display (
컄
page 493).
!
The shift procedure can only be performed
when the following conditions are met:
앫
The engine is running (
컄
page 41).
앫
The automatic transmission is in position N
(
컄
page 193).
앫
The vehicle speed does not exceed 25 mph
(40 km/h).
i
There is no reset to HIGH after the ignition
has been switched off.