Mercedes-Benz 2007 GL 320 CDI, Operator'S Manual

Page: 139 / 595

138
Controls in detail
Seats
Head restraint fore and aft adjustment
The angle of the head restraint for the out-
er second-row seats or the third-row seats
can be adjusted manually.
왘
While seated, reach behind you with
both hands and find lower edge of the
head restraint.
왘
Adjust the head restraint to the desired
position by pushing or pulling on the
lower edge of the head restraint cush-
ion.
Head restraints
Second-row seat head restraint
1
Head restraint
2
Release button
Removing
왘
Second-row seat:
Fold the seat backrest forward
(
컄
page 136).
왘
Third-row seat:
Fold the seat backrest forward
(
컄
page 307).
왘
Pull head restraint
1
to its uppermost
position.
Warning!
G
Do not drive the vehicle without the seat
head restraints installed when the rear seats
are occupied. Head restraints are intended
to help reduce injuries during an accident.
With a rear seat occupied, make sure to
move the respective head restraint up from
the lowest non-use position and have the oc-
cupant adjust the head restraint properly.
For your protection, drive only with properly
positioned head restraints.
Adjust the head restraint in such a way that
it is as close to the head as possible and the
center of the head restraint supports the
back of the head at eye level. This will re-
duce the potential for injury to the head and
neck in the event of an accident or similar
situation.