Mercedes-Benz 2007 GL 320 CDI, Operator'S Manual

Page: 251 / 595

250
Controls in detail
Power windows
Fully opening the door windows
(Express-open)
왘
Press switch
1
,
2
,
3
, or
6
(
컄
page 248) past the resistance point
and release.
The corresponding door window opens
completely.
Fully closing the door windows
(Express-close)
왘
Pull switch
1
,
2
,
3
, or
6
(
컄
page 248) past the resistance point
and release.
The corresponding door window closes
completely.
왘
Remove the obstruction.
왘
Pull the respective door window switch
past the resistance point again and
release.
Stopping door windows during
Express-operation
왘
Press or pull the respective door
window switch again.
Hinged quarter windows*
The switches for opening and closing the
hinged quarter windows are located on the
door control panel of the driver’s door
(
컄
page 35).
1
Hinged quarter windows: opening
2
Hinged quarter windows: closing
Opening
왘
Press and release switch
1
.
To stop the hinged quarter window:
왘
Press and release switch
1
once
more.
Warning!
G
Driver’s door only:
If within 5 seconds switch is again pulled
past the resistance point and released, the
automatic reversal will not function.
i
If the upward movement of a door window is
blocked during the closing procedure, the door
window will stop and open slightly.
i
If the door window still does not close when
there is no obstruction, pull and hold the respec-
tive power window switch. The door window will
then close without the obstruction sensor
function.