Mercedes-Benz 2007 GL 320 CDI, Operator'S Manual

Page: 537 / 595

536
Practical hints
Battery
Step 8 (Removing)
c
Battery
왘
Tilt the battery
c
with the negative
terminal side upwards.
왘
Take out the battery maintaining its
tilted position in the direction of the
arrow.
Step 9 (Reinstalling)
왘
Carry out step 8 in reverse order
(
컄
page 536).
Battery, shown removed for illustration
9
Battery ventilation hose
d
Vent plug
왘
Carry out step 10 to reconnect the
battery (
컄
page 536).
왘
Follow steps 5 to 1 in reverse order to
completely reinstall the battery
(
컄
page 535) to (
컄
page 532).
Step 10 (Reconnecting)
왘
If the battery has been removed, first
carry out step 8 in reverse order
(
컄
page 536).
왘
Open the driver’s door.
왘
Make sure all electrical consumers are
turned off.
왘
Make sure the SmartKey is removed
from the starter switch.
Vehicles with KEYLESS-GO*:
왘
Make sure the vehicle’s on-board
electronics have status
0 (Open the
driver’s door. With the driver’s door
open, the vehicle’s on-board elec-
tronics have status
0 , same as with
the SmartKey removed from the
starter switch (
컄
page 41)).
!
The battery, the battery ventilation hose
9
and the lateral plug
d
(
컄
page 536) must
always be securely installed when the vehicle is
in operation.