Mercedes-Benz 2007 GL 320 CDI, Operator'S Manual

Page: 236 / 595

235
Controls in detail
3-zone automatic climate control*
Operating the automatic climate
control system in automatic mode
You can switch the automatic climate con-
trol system on and off separately for each
zone as needed.
Activating
왘
Press button
U
(
컄
page 232) while
the engine is running.
The indicator lamp on the button
comes on. Air volume and air distribu-
tion are controlled separately for each
zone.
왘
Use temperature controls
1
and
9
(
컄
page 232) to separately adjust the
air temperature on each side of the
passenger compartment.
The temperature of the interior is ad-
justed automatically.
Deactivating
왘
Press one button of the air distribution
(
컄
page 232) or press button
or
Q
(
컄
page 232).
The indicator lamp on button
U
goes out.
Depending on which button you press –
the air distribution button or the air vol-
ume button
or
Q
– automatic
control of either the air distribution or
air volume is switched off.
Setting the temperature
Use temperature control
1
and
9
(
컄
page 232) to separately adjust the air
temperature on each side of the passenger
compartment. You should raise or lower
the temperature setting in small incre-
ments, preferably starting at 72°F (22°C).
The automatic climate control will adjust to
the set temperature as fast as possible.
Increasing
왘
Turn temperature control
1
and/or
9
slightly clockwise.
The automatic climate control system
will correspondingly adjust the interior
air temperature.
Decreasing
왘
Turn the temperature control
1
and/or
9
slightly counterclockwise.
The automatic climate control system
will correspondingly adjust the interior
air temperature.
i
When operating the automatic climate
control system in automatic mode, you will only
rarely need to adjust the temperature, air volume
and air distribution.
In automatic mode, cooling with dehumidify is
switched on. This function can be switched off if
necessary.